Simple and efficient boiler maintenance tips – part 2

Simple and efficient boiler maintenance tips -part2

This is the continuation of our previous article on Boiler Maintenance tips here. We have already discussed cleaning the air vents, monitoring the water and pressure levels, bleeding your radiators, etc in the first part. Now we will be listing out few more tips for maintaining your boiler.

Annual Service

This is a must-do thing for the welfare of your boiler. Arrange for an annual service by a Gas Safe certified engineer each year without fail. He will be able to figure out any problems early and fix them. Your boiler will also operate efficiently when serviced completely. This once a year service cost will save you lots of money and keep your boiler in a top-notch condition.

Prevent blockage

In general, people don’t use the central heating system during the summer season and this is when the boiler starts to develop faults. Try to use the central heating system once a week during summer to prevent the pumps from seizing up. This will keep the boiler fresh and in working condition. Just switch it on for 10 minutes each week.

Balance the radiators

We have already discussed in detail about how to bleed the radiators. Once your radiators are bled, you might still notice few radiators are relatively warmer than the others. This is a common issue and can be fixed easily. Just adjust the temperature in the radiators which are most hot and reduce their temperature. Once done, cooler radiators will warm up fast and the balance will be achieved. In most cases, the radiators near the boiler tend to heat up fast.

Review the overflow pipes

Do a weekly review of the overflow pipes located outside your property. If you notice water dripping from this pipe, it’s an indication that there is a problem in your boiler. Dripping will occur when the pressure release valve becomes faulty. Pressure release value can become faulty over time automatically or if your boiler is overfilled. Whatever be the reason, you need to call a service engineer to resolve this immediately.

Maintain ventilation

Boiler generates a lot of heat and hence requires sufficient ventilation room for smooth functioning. Place your boiler in a place which has free space and keep it clutter-free all the time. Each and every boiler comes with its own set of ventilation standards requirements. You can find ventilation instructions in the user manual, please adhere to them. If your boiler is kept inside a box, make sure it has an access panel for easy maintenance.

Check the color of the flame

Review the color of your flame once a week. If the boiler is working smoothly then the color of the flame should be blue. If you notice that the color of the flame is either yellow or orange, then you need to call for a Gas Safe engineer without any delay. This clearly indicates that there is something seriously wrong with your boiler that needs immediate attention.

Flush your boiler

Flushing your boiler twice a year will keep it in perfect condition. Flushing can be done by you and doesn’t require a service professional. Here are the steps for flushing.

  1. Switch off the power supply to your boiler and close the water supply value.
  2. Allow the water to cool after switching off.
  3. Attached a lengthy garden hose to the boiler drain.
  4. Open all air vents on the radiators and release the drain value.
  5. Water will flow out through the hose, give it enough time for completely draining out.
  6. Once all the water has come out, detach the hose and close the drain value.
  7. Seal all air vents and switch the power back on.
  8. Refill the boiler with clean water and flushing is completed.



Simple and efficient boiler maintenance tips – part 1

Proper boiler maintenance is not only important for keeping the boiler fault-free but also helps in efficiency. Boilers that are properly maintained will consume lesser energy compared to other boilers. It is imperative for boilers to develop problems over time and may become unusable too. Boiler repairs are expensive and you can prevent most of the repairs with good care and maintenance.

Benefits of Boiler Maintenance

  • Reduce the probability of faults and failure.
  • Increase efficiency and hence save cost on your monthly energy bills
  • Increase the overall life of the boiler.
  • Prevent fatal accidents that might happen due to a faulty boiler.
  • Here are some of the basic tips for boiler maintenance

Cleaning the air vents: It is common for some boilers to develop a blockage in air vents and flues. Blockage might be a result of the accumulation of dust in the vent. Make it a part of your maintenance schedule to inspect the vents and flues for any dirt and clear them immediately. This blockage is highly prevalent in gas boilers.

Monitor water levels: Make sure to check the water levels in your boiler twice a month. If your boiler operates without sufficient water it might lead to a total collapse and result in fatal accidents too. Whenever you notice that the water level is below the required standard, you need to review and fix the plumbing. This is a simple exercise which will keep your boiler safe on a long run.

Monitor Pressure levels: When the boiler is working, check the pressure gauge for pressure readings. This should not go below the standards mentioned by your respective brand. If the pressure level is lower than the recommended standard you can top it up to the required levels. This process is called refilling. You have to be careful while adjusting pressure as it may damage the component called as pressure release valve. If the pressure level keeps falling frequently then you need to call gas safe engineers to check the fault.

Bleed your radiators: It is a common problem that air might get stuck in your radiators. This will prevent some of the radiators from heating up which reduces the efficiency of the boiler. To fix this problem you have to bleed your radiators. You can confirm the presence of air in the radiator when the bottom part is hot but the top part if cold. Just use radiator key and turn it in counter-clockwise direction slowly and place a cloth below the key. The cloth will be used to collect any excess water that comes out. When you hold the key in the counter-clockwise direction you can hear a hissing sound which indicates that the air is being released from the radiator. Once all the air comes out the hissing sound stops and water will be released. Now turn the radiator key clockwise to close the valve, this is how you bleed the radiator. Once the bleeding is completed check the pressure gauge. Pressure levels will fall during bleeding; now refill the pressure to the standards mention in your user manual.


Benefits of getting a boiler finance

Benefits of getting a boiler finance.

Purchasing a new and efficient boiler requires a lot of funds. Many people postpone their decision to upgrade just because of the costs. If you have a troublesome boiler and don’t have funds for a new boiler then you are left with a dangerous situation. Thanks to boiler finance now everyone can upgrade to new boiler and pay the money in installments. No need to make huge lump sum payments upfront. These boiler finance options come with very low rates ranging from 9.9% to 15%. Let us look in detail various benefits of boiler finance and why you should opt for one.

No Deposits

Most of the boiler finance options available in the UK do not ask for a deposit in advance. There is no need to touch your hard earned savings while buying a boiler. Some companies allow you to pay your first installment one month after installation. All you need to do is buy the boiler from an accredited seller and provide all necessary documents for the finance.


Flexible monthly installments

This is one of the biggest benefits of taking boiler finance. You have the freedom to select your monthly payments based on your budget and preferences. There is no pressure to pay a fixed amount, instead, you can opt for an amount which is feasible for you. It can be as low as £10 per month or as high as you can afford. The more you pay the sooner you can close the finance. There are some companies which offer boiler finance at zero cost of interest like Boiler Repairs Southampton. Choose your boiler finance monthly installment wisely and have a peaceful future.

The Savings

If you are still hesitant to upgrade your boiler considering the monthly commitment due to boiler finance, think again. A newly installed ‘A’ rated boiler will easily save £15 per month on your energy bills. If your monthly boiler payment is £30, then half of it goes into savings. Another good reason to purchase a new boiler with boiler finance is that your old boiler might breakdown anytime and you might need to spend on repairs which are expensive. By all counts upgrading your boiler with finance is a sensible thing to do which will benefit you in the long term.

boiler finance


Most of the boiler finance companies end up insuring your new boiler at the time of processing your finance application. In addition to the existing brand warranty, your boiler is double protected with the insurance bought by the boiler finance company. Just one more good reason to apply for boiler finance. For a full list of boiler finance option, click here.

No penalties on pre-closure

Unlike mortgage loans, there are no pre-closure penalties for paying your boiler finance in the middle of the term. You have the freedom to pay part of the full amount of the loan whenever possible for you. There are no charges for closing the loan in the middle.

We have listed out all potential benefits of taking boiler finance. As you can clearly see there more benefits than negatives which makes boiler finance an attractive option for buying new boilers.